How to Open a Pool after Winter Season

If you want to know how to open a pool then you’ve come to the right place. With spring around the corner we all want to get back to our pools, but we feel unsure about how this should be done. Luckily, we’ve listed a complete routine for you to make sure that the only thing you need to worry about is enjoying the season.

1.     Check chemical levels-
Make sure that you have proper inventory for your pool cleaning ready in your hand. If any of the chemicals were not stored properly or they are in low supply, then you will have to buy replacements. Chlorine for example, if left open over a prolonged period may decay and cause harm to your pool.

2.     Remove debris over the pool cover-
Over the winter dead branches, leaves and debris build up that need to be cleaned up before you remove your pool’s cover. Clean the area around your pool and do the same on the surface of your pool cover, doing this step diligently it will save your lot of time. Finally, remove the pool cover and wash it with a mild detergent to get rid of any bacteria before you move it to storage.

 3.     Inspect your pool-
If your pool is vinyl-lined, you will want to search around the edges for any rips or tears caused by rocks and other debris. If you find any torn parts this can be repaired with a patch kit available at local department store near your house. If there is something that you are unsure of then call the company representative who installed the vinyl for you.

 4.     Plugs & skimmer baskets-
You will want to remove any freeze plugs from water inlets. If you used antifreeze, than drain your pool till it is below the inlets and doing the same for the antifreeze. Next, remove winter plates from the skimmer box with care. Fit the hose from the skimmer and turn jets leading to the pump & filter.

5.     Equipment and plumbing
Reconnect the filter, pump and heater with attention to any rust or decay, if needed make necessary replacements. Check valves to see if they are open and start filling pump with water to test for priming and lubricate O-rings and gaskets.

 6.     Fill & start filtration-
Once everything is in working order, start pumping water into your pool carefully to prevent any debris from falling in. Switch on the power to the pool system and look for any type of malfunctioning, if needed contact a mechanic for repairs.

 7.     Test water
After 1-2 days use your pool water test kit to take a sample for a local pool professional to examine and make necessary adjustments. If you use a mesh cover make sure to add 2-3 gallons of liquid shock and open your pool early in April or May to let the shock treatment to settle in for about 2 weeks.Finally once everything is complete, you and your family can jump in and enjoy a clean and refreshing pool. We hope you found this article helpful on how to open a pool after winter season?

Author Bio- This post has been written by Tressy Jones. She loves to write about Home Improvement. She works for MSMechanical.com. They provide best air conditioning services.

Pool Maintenance Essentials

Pool maintenance is very important and cannot be ignored. You should clean your pool regularly as they are open water systems that are prone to rain, snow, insects, debris and insects among others. Moreover, fallen leaves as well as other organic matter inside the pool ultimately decay and attract bacteria. Unclean water pool can lead to spread of waterborne diseases like amoebic dysentery, typhoid, cholera, gastroenteritis and salmonellosis. Some of the problems commonly associated with pools include pool discoloration, cloudy water, sharp chlorine smell, algal upsurge and itchy eyes. You can avoid these problems through proper maintenance of your pool.

1. Two times a Week:

• pH Level-
Retaining the correct water balance is vital. The pH level which refers to the level of acidity or else alkalinity should be tested two times in a week. The pH level should be a little alkaline, about 7.2-7.6. This is the pH level in which chlorine is most efficient. In addition, this pH level is the same as that of our skin. You can control this pH level by either adding an acid, like muriatic acid, or else an alkali like baking soda or soda ash depending on if the water is excessively acidic or excessively alkaline. Wrong pH levels can cause damage of pool and equipment.

• Chlorine Level-
Disinfecting the pool involves destroying bacterial as well as algal forms. Poorly sterilizing the pool makes it a procreation ground for bacteria. You can use chlorine or bromine to get rid of these bacteria as well as algae forms. Your pool water must have a 1.0-3.0 ppm level of chlorine. You can get chlorine in the form of tablet, granular or else liquid. Because a chlorine level is not constant, it is recommendable to super chlorinate the pool regularly, especially during the night while the pool is not being used.

• Check Skimmer Basket-
You must check the skimmer basket and clear of debris in order to maintain a fresh and flowing pool water. Debris like leaves, insects, bird dung and other filthy substances should be removed from the pool’s surface by means of a surface skimmer or else leaf net. Moreover, the pool tiles should be cleaned, to remove rings and froth lines, using liquid or pounded tile sanitization agents.

2. One time per Week:

• Shock Treatment-
The best method to destroy chlorine compounds I through shock treatment. It is advisable to shock the pool during the evenings as this increase the amount of chlorine in the swimming pool as well as destroys bacteria, leaving the pool shining and beautiful.

• Algaecide-
You should treat your pool every week with algaecide to control algal toxins. You must preferably do this in the morning following the shock treatment. Look for high-quality algaecide that kill the algae without destroying the pool tiles.

• Metal out-
Metal Out is a substance that gets rid of metal particles inside the water. To get rid of small metal particles that often suspend on the surface of the pool water add metal out every week.

• Clarifier-
To clear the irritating cloudy water adds a quantity of clarifier to the pool water. The clarifying agents remove particles which are very small to be trapped in the sieve. Clarifying agents make the small particles to collect together, to create bigger particles that may be discarded through vacuuming or filtration.

3. Monthly:

• Check calcium Level-
It is important to check the level of calcium in the pool water as water with very low calcium can be corrosive whereas water with high calcium can lead to scale formation. You can simply take a sample of the pool water to your nearest pool store for test.

• Alkalinity-
Right total alkalinity can prevent rapid changes of pH levels in the pool water. The right total alkalinity is 80-120 ppm, which may be adjusted by adding baking soda.

4. Mid-Season:
It is important to once in a while clean pool filters with filter cleaner degreaser as they are prone to get accumulated with oil and grease.

 

Author Bio: this article has been written by Well Back. He loves to write about Home Improvement. He is evangelist at CrossvilleHeatingandCooling.com. They provide best air conditioning services.

Tips for Planning Your Pool

Though planning and building a pool can be an exciting experience for the people who know how to tackle the things but if you are not familiar with the things then you should read out tips planning pool provided in this article. You should be aware of the ways of building a pool in your backyard if you are ready for it.

Creating photo-book:

A photo-book containing various ideas for planning your pool can be a good attempt in this direction as you can get the idea of types and styles of pools to choose for your place. You can search on social networking sites and various other websites to find these photos. You can share the information collected from online search with your pool builder to start the pool building work according to the plan settled between you and your builder.

Establishing the budget:

The construction of pool is costly affair so its budget should be considered while planning your backyard pool. You should first of all fix a budget of building pool so that you can start the construction work accordingly. Though you can extend the budget if needed but initially it is necessary to ascertain the budget for it.

Choose the right building materials:

Because this project will ultimately be a water containment unit, it is important not to take an short cuts with choosing the building materials.  Choosing quality materials will make the poll last longer with minimal care.

Using the trusted resources:

You should contact the reliable pool builders and designers after consulting your family and friends who had recently built up pools in their homes. You can also read out the reviews provided on the pool builders’ site to decide in this respect.

Wisely select the location:

The location of your pool is next essential part of pool planning. Before building the pool in your backyard you should think over various aspects that can affect its suitability like soil quality, surrounding views and privacy.

Consider the frequency of use:

The frequency of using the pool is one of the necessary tips planning pool which can be helpful in planning its construction in much better way. You can add various other facilities like landscape lighting, water heaters, slides etc. if you are going to use it very frequently.

Know the rules:

You should go through local pool building rules and regulations before starting the pool construction at your home as there may be some restrictions from local authorities as per the situation of your home.

Green environment:

Building an eco-friendly environment around your pool will not only save your money but also provide a green and attractive look to the location. You can also avail various incentives from the local authorities for your green thoughts.

Maintenance of pool:

It should also be essential part of your planning before building it. The balancing of Ph and cleanliness of the pool water should be easy. You should also consider while planning your pool whether you can maintain it yourself or want to engage some service providing company for this purpose. The pool building contractor can help you in contacting some reputed service provider for the proper maintenance of your pool.

Insurance for the pool:

Insurance cover is also an essential part of your pool planning for the safety of the users and the pool itself. You can contact an insurance agent for this kind of services.

Safety of the users:

Safety of the children, animals and other guests around the pool is another important issue among the tips of planning pool. You can put alarms, fencing and various other safety covers at different layers to ensure this issue.

Author Bio: This post has been written by Well Back. He loves to write about Home Improvement and Technology. He is recommends AireCentral.net for heating and cooling service.